Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Pembroke Pines, FL
Chimney inspection in Pembroke Pines starts with one correction most homeowners don’t expect: you probably don’t have a masonry chimney. Most homes here run a metal flue pipe from a gas or electric appliance, and that pipe needs a different kind of attention than a brick stack up north. We’re a chimney-only company working with professional-grade lines like DuraFlex and HeatShield, handling inspection, sweeping and repair as one job rather than handing you off between contractors. Our technicians have up to 12 years of experience. Call (877) 798-7859 for a free estimate.
Why Pembroke Pines Homes Are Different
Pembroke Pines is a South Florida suburb where a wood-burning fireplace is the exception, not the rule. The housing stock runs from 1970s single-family developments through townhomes built into the 2000s, most of them stucco over CBS walls under concrete tile roofs. That construction doesn’t leave much room for a traditional masonry chimney, so what sits on the roof is usually a metal flue termination serving a gas appliance or a direct-vent fireplace. The work shifts accordingly: less creosote, more lint, animal nests and storm debris.
The climate shapes it further. There’s no real heating season, so fireplaces sit idle for months while year-round humidity and heavy summer rain work on the inside of metal flues. Rust is a genuine concern in a way it isn’t in drier parts of the country. Birds, squirrels and insects treat uncapped or loosely capped flue pipes as real estate, and after a named storm or even a hard summer squall we regularly pull palm fronds, roof tile fragments and coconuts out of chimney caps and flue terminations. A blocked gas appliance exhaust is a carbon monoxide problem, not an inconvenience, which is why we treat a debris call as a diagnostic job rather than a quick sweep.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Pembroke Pines Services
Two jobs account for most of the calls we take in Pembroke Pines, and both start from the same place: finding out what’s actually happening inside the flue before anyone quotes a repair.
Chimney Sweep in Pembroke Pines
A sweep in Pembroke Pines usually means clearing a metal flue of lint, nests and whatever the last storm pushed into the cap. We run the brush and a camera, then show you what came out. Where a wood-burning fireplace does exist, creosote removal works the way it does anywhere, but the volume is typically lower here than in a cold-climate home. Either way, the sweep tells us whether the flue is sound or whether something has rusted through. For the full breakdown of what a sweep involves here, see Chimney Sweep in Pembroke Pines.

Chimney Repair in Pembroke Pines
Repair is where the local conditions show. Metal flues rust from the inside out under year-round humidity, caps take impact damage from storm debris, and flashings pull away from concrete tile roofs. We work with DuraFlex flexible liner systems for relining a deteriorated flue and HeatShield for resurfacing a cracked liner where that method fits. A general handyman can’t do either. Because the company that inspects is the same one that repairs, you’re not relaying the diagnosis to a second outfit. Details are on our Chimney Repair in Pembroke Pines page.

Chimney Inspection in Pembroke Pines
Chimney inspection in Pembroke Pines is the starting point for every job we do here, because the housing stock doesn’t match the northern template. Most homes built from the 1970s onward have direct-vent metal flues serving gas fireplaces rather than masonry chimneys, and years of humidity plus storm debris do damage that a quick look from the ground won’t catch. A passing glance at the cap tells you nothing about the flue interior. Our Chimney Inspection begins with a camera run and ends with a photo report you can read yourself, and nothing gets recommended that the images don’t show.
Chimney Inspection Services
Signs you need it
You smell a draft or exhaust odor in the room when the appliance runs, the cap looks bent or blocked, or it has been more than a year since anyone looked inside the flue.
What it costs in Pembroke Pines
A standard chimney inspection in Pembroke Pines typically runs $150 to $350, and the written estimate sets the final price.
How we do it
We check the firebox, damper, flue interior and termination, run a camera through the pipe, photograph what we find, and walk you through the images before we recommend anything.
Chimney Flue Inspection
Signs you need it
The flue shows rust streaks, the appliance vents slowly, or you can see daylight where the pipe joints should be tight.
What it costs in Pembroke Pines
A flue-only camera inspection typically falls within that same $150 to $350 range, confirmed by the written estimate before we book.
How we do it
We isolate the flue, run the camera the full length of the pipe, check joint integrity and cap condition, and note any obstruction from nests, debris or collapsed liner material.
Level 2 Chimney Inspection
Signs you need it
You’re buying or selling the home, the appliance is being replaced, or a Level 1 check turned up something that needs a closer look.
What it costs in Pembroke Pines
A Level 2 inspection with video scanning is typically the higher end of the range, $150 to $350 depending on flue configuration, set by the written estimate.
How we do it
Everything a basic inspection covers, plus video scanning of the flue and accessible portions of the chimney and venting, documented in a photo report for your records or your buyer.
What Chimney Inspection Costs in Pembroke Pines
The figures below are typical for this market, not a quote. Inspection type and flue accessibility are what move the number.
| Item | Typical range in Pembroke Pines |
|---|---|
| Standard chimney inspection | $150 – $350 |
| Flue camera inspection | $150 – $350 |
| Level 2 inspection with video scan | $150 – $350 |
Do I really need an inspection if I never use the fireplace?
Yes, because the flue still serves a gas appliance or vents the home. Debris in a termination or a rusted pipe can block exhaust whether or not you’ve ever lit a fire. Call (877) 798-7859 for an exact quote, and estimates are free.
How long does a chimney inspection take in Pembroke Pines?
Most inspections take 45 minutes to an hour and a half. Flue configuration drives the time more than house size. Call (877) 798-7859 to book one, and estimates are free.
Brands We Service in Pembroke Pines
We work with DuraFlex flexible liner systems, HeatShield flue resurfacing, Gelco and Copperfield components, matching the repair to the flue type rather than forcing whatever material is closest to hand. We don’t claim to stock parts locally, and we won’t promise a turnaround we haven’t confirmed. See our brands for what each line is used for.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Pembroke Pines, FL
These ranges are typical for Pembroke Pines. Your written estimate, given before any work starts, sets the final price.
| Service | Typical range in Pembroke Pines |
|---|---|
| Standard chimney inspection | $150 – $350 |
| Flue camera inspection | $150 – $350 |
| Level 2 inspection with video scan | $150 – $350 |
| Chimney sweep (standard) | $125 – $300 |
| Chimney cap replacement | $150 – $450 |
| Flue relining with flexible liner | $1,800 – $5,500 |
| HeatShield flue resurfacing | $1,200 – $3,500 |
| Chimney crown repair | $300 – $1,200 |
| Flashing repair | $250 – $800 |
Two things push the price up in Pembroke Pines: a flue that needs full relining rather than resurfacing, and roof access complicated by concrete tile that has to be handled without breaking it. We give you the written estimate upfront, and we tell you plainly when work can safely wait.
Neighborhoods We Serve in Pembroke Pines
We handle chimney inspection, sweeping and repair across Pembroke Pines, from the older single-family streets to the newer townhome developments. The 33028 area and the neighborhoods around it share the same pattern: metal flues, storm-stressed caps and flashings that need checking after a heavy summer. Response is scheduled around the job, and we’ll confirm timing when you book.
- Chapel Trail
- Silver Lakes
- Pembroke Falls
- Walnut Creek
- Grand Palms
Service Area – Cities Near Pembroke Pines
Pembroke Pines sits in the middle of our South Florida work, and we take calls from the surrounding cities too. If you’re just outside the line, we’ll tell you honestly whether we cover your address. Neighbors we regularly schedule include Davie, FL, Hollywood, FL, Medley, FL and Boulevard Gardens, FL. Same inspection-first approach, same photo report, same written estimate before anything starts.
Serving Pembroke Pines, FL – Our Local Coverage Area
We serve Pembroke Pines and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Pembroke Pines
Relining and structural repair often require one; a sweep or inspection typically doesn’t. Rules vary, so check with the city’s building department before work begins. We’ll tell you what our scope covers. Call (877) 798-7859 with questions, and estimates are free.
Some associations restrict cap styles or visible exterior changes, so read your rules before approving a repair. We can describe what we’re installing so you can check with your board first. Call (877) 798-7859 to talk it through, and estimates are free.
We cover Pembroke Pines and the surrounding cities, scheduling by job rather than by zone. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (877) 798-7859 to confirm your address, and estimates are free.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pembroke Pines Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Carmen Mendoza"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Chris Sullivan"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Stephanie Anderson