Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Franklin Park, FL
Chimney inspection is the service Franklin Park homeowners call us for most, and it’s the right place to start. The typical Franklin Park chimney here sits on a 1950s to 1970s concrete-block and stucco house, was built to look good rather than to heat the place, and hasn’t been looked at closely in years. In a climate this humid, the problem inside that chimney is usually moisture and rust, not creosote. We work on chimney systems only, we carry professional-grade product lines, and our technicians have up to 12 years of experience. Call (877) 798-7859 to book an inspection or a sweep.
Why Franklin Park Homes Are Different
Most chimney work in the country is about creosote. In Franklin Park it’s about water. The ZIP 33311 housing stock is largely single-story concrete-block and stucco homes from the 1950s through the 1970s, and a lot of the chimneys attached to them were built for appearance rather than regular heating use. That means thinner masonry walls, mortar crowns that have weathered down, and clay flue tiles that crack from age and from sitting unused. Add hot, humid summers, heavy rainy-season downpours, and hurricane-season wind-driven rain, and you get moisture working its way into masonry year after year. The result is spalling on the outside of the chimney and mold or rust on the inside of a flue nobody has used in a decade.
That’s why annual cleaning and a watertightness check matter more here than creosote removal. The biggest finds on local calls are decorative chimneys that were never properly lined, prefab fireboxes rusted out from disuse, and crowns split by a past hurricane. Many homeowners only pick up the phone after noticing a musty smell or a stain on the ceiling, not after burning a fire.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Franklin Park Services
Two jobs account for nearly every call we take in Franklin Park: sweeping the flue and repairing what the inspection turns up. Here’s what each one actually involves on a Franklin Park chimney.
Chimney Sweep in Franklin Park
Sweeping a Franklin Park chimney is often less about soot and more about what disuse has left behind. On a capped or decorative flue, we’re as likely to pull out a nest, leaf litter, or a rust scale as we are creosote. Humid air sitting in an unused flue breeds mold, and a blocked flue vents nothing at all. We brush the flue with the right size and stiffness for the liner, then check that the cap and crown are actually keeping rainwater out, because a rainy season will undo a clean sweep if water is still getting in. If you want the maintenance side handled, start with a chimney sweep and we’ll tell you straight whether anything else needs doing.

Chimney Repair in Franklin Park
Repair is where most Franklin Park chimneys end up once someone actually looks at them. Cracked clay tiles, a crown that’s lost its slope, mortar joints eaten back by years of rain, a rusted-out prefab firebox: these are structural problems, not maintenance ones, and sweeping won’t touch them. We match the repair to the flue type rather than grabbing whatever material is closest. That can mean HeatShield resurfacing for a cracked but structurally sound liner, or a DuraFlex flexible liner when the original flue is deteriorated enough to need relining. When the diagnosis calls for it, chimney repair is handled by the same team that inspected the chimney, so nothing gets handed off.

Chimney Inspection in Franklin Park
Chimney inspection in Franklin Park is rarely a formality. On a mid-century concrete-block home, the fireplace may be used a handful of cool nights a year, which is exactly what lets a hazard sit quietly behind a cosmetic facade, so the inspection is how we find a neglected or unlined flue before it becomes a fire risk. It starts with a proper look at a full chimney inspection – camera, photos, and a plain answer about what we found and what can wait.
Chimney Flue Inspection
The flue is the part you can’t see, and on a Franklin Park chimney it’s where the surprises live. A flue that was never lined, a tile cracked from age, or rust and mold from years of humid air sitting in an unused stack all show up here.
Signs you need it
A musty smell in the room with the fireplace, a ceiling or wall stain near the chimney, or a flue you’ve never actually looked down are all reasons to have it checked.
What it costs in Franklin Park
Flue inspection typically runs $125 to $250, and a Level 2 inspection with camera runs $200 to $450.
How we do it
We run a camera down the flue, document the liner condition from top to bottom, and photograph anything we find so you can see it yourself.
Level 2 Chimney Inspection
A Level 2 inspection goes further than a visual check: it covers the flue, the firebox, the crown, and the exterior masonry, and it’s the right call when a chimney has changed hands, changed fuel type, or taken storm damage. On Franklin Park’s older stock, it’s often the first real look a chimney has had.
Signs you need it
A recent home purchase, a switch to a gas insert, damage after a hurricane, or a chimney that hasn’t been inspected in years all point to Level 2.
What it costs in Franklin Park
A Level 2 inspection typically costs $200 to $450 depending on access and whether a camera is needed.
How we do it
We inspect the accessible interior and exterior of the chimney, run a camera through the flue, and give you a written account of the condition with photos attached.
What Chimney Inspection Costs in Franklin Park
| Item | Typical range in Franklin Park |
|---|---|
| Basic visual inspection | $125 – $250 |
| Level 2 inspection with camera | $200 – $450 |
| Sweep plus inspection | $150 – $350 |
Do I need an inspection if I barely use the fireplace?
Yes, and that’s the common case in Franklin Park. Light use means less creosote and more moisture damage, mold, and rust inside a flue that sits idle most of the year. An inspection catches those before they spread into the masonry.
How often should a Franklin Park chimney be inspected?
Once a year is the standard, and in this climate it’s worth keeping to even on a decorative chimney. Year-round humidity and hurricane-season rain work on masonry whether or not you burn. Call (877) 798-7859 to get it on the calendar.
Brands We Service in Franklin Park
We work with established chimney industry product lines, including Copperfield, DuraFlex, HeatShield, and Gelco, so repairs and components are matched to your flue type rather than improvised. We don’t stock parts locally; material is specified from the inspection and ordered for the job. You can see the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Franklin Park, FL
| Service | Typical range in Franklin Park |
|---|---|
| Basic visual inspection | $125 – $250 |
| Level 2 inspection with camera | $200 – $450 |
| Sweep plus inspection | $150 – $350 |
| Standard chimney sweep | $150 – $300 |
| Crown repair or rebuild | $300 – $800 |
| Chimney cap installation | $150 – $400 |
| Flue tile crack repair (HeatShield) | $600 – $1,500 |
| Full chimney relining (DuraFlex) | $2,500 – $5,000 |
| Prefab firebox replacement | $1,500 – $3,500 |
| Masonry tuckpointing | $500 – $1,500 |
In Franklin Park, price climbs with how much of the masonry has been touched by water: a chimney with a failed crown and spalled brick is a bigger job than one that just needs a sweep and a cap. A flue that needs relining is the other jump. Nothing gets recommended without camera evidence you can look at yourself, and the written estimate sets the final price before any work starts.
Neighborhoods We Serve in Franklin Park
We cover Franklin Park and the surrounding blocks of this part of Broward County, and we schedule inspections and sweeps across the neighborhood rather than limiting ourselves to one street. Response is the same throughout Franklin Park: book it, and we’ll confirm a window that fits your week. If you’re on the edge of the neighborhood, we’ll tell you plainly whether you’re in our area before you book.
- Franklin Park proper
- The blocks bordering Boulevard Gardens
- Streets near Washington Park
- Homes along the Davie Road corridor
- Residential streets toward Hollywood
Service Area – Cities Near Franklin Park
Franklin Park sits close to several communities we also cover, and the housing stock and climate are similar enough that the advice carries over. We work in Boulevard Gardens, FL and Washington Park, FL just to the north, in Davie, FL to the west, and in Hollywood, FL to the east. If you’re near the line between any of these and Franklin Park, call and we’ll confirm coverage and get you booked. Our main base of operations is Davie, and the same team that inspects is the one that sweeps and repairs.
Serving Franklin Park, FL – Our Local Coverage Area
We serve Franklin Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Franklin Park
Yes. We cover Franklin Park and the surrounding streets, and we’ll confirm your address when you book so there’s no confusion. Call (877) 798-7859. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Structural work like relining or a crown rebuild often needs a permit, and many HOAs require approval before any exterior change to a chimney. We’ll tell you what we know applies and point you to your city’s building department and your HOA for confirmation.
Call (877) 798-7859 and we’ll book you into the next opening. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
If your Franklin Park chimney hasn’t been looked at in years, or you’ve noticed a musty smell or a ceiling stain, the inspection is the place to start, and it’s free to find out what you’re dealing with. Call (877) 798-7859 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Estimates are free, the price is set per job by the written estimate, and nothing is recommended without camera evidence you can see for yourself.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Franklin Park Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Carmen Mendoza"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Chris Sullivan"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Stephanie Anderson