Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Davie Homeowners Choose HeatShield Chimney Cleaning
We provide independent HeatShield chimney cleaning, inspection and repair service in Davie, and we’re not affiliated with or authorized by HeatShield. What makes our HeatShield work different is that we understand the resurfacing system at the product level: which castable mix matches which flue tile, how the insulating formula behaves through a South Florida rainy season, and when a HeatShield resurfacing is the right call instead of a rebuild. We sweep the flue, inspect it with a camera, and restore it with the system that belongs in it.

Davie is horse-country suburbia, and that shapes the work. Most fireplaces here are decorative or rarely used, so a HeatShield flue that sat dormant through a humid summer collects moisture and pests rather than deep creosote. Our technicians have up to 12 years of experience with exactly this kind of chimney. If you’ve noticed your draft weakening or a musty smell when you first light up, that’s worth a closer look. Call (877) 798-7859. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Chimney Sweep Davie for Your HeatShield Chimney Cleaning?
HeatShield resurfacing isn’t a coating you brush on and forget. It’s a castable system that bonds to a prepared flue tile, and it only performs if the prep, the mix selection and the cure all happen in the right order. Our technicians work with these systems regularly, so they can tell the difference between a flue that failed because the application was wrong and one that failed because the masonry underneath gave out. That distinction decides whether you pay for a repair or a rebuild.
We use genuine HeatShield cerfractory and insulating mixes for resurfacing, joint repair and crown-coating work. Aftermarket castables don’t match the expansion and insulating properties of the real product, and the mismatch shows up a season or two later as delamination. We’re an independent HeatShield service provider, not a dealer, and we don’t claim HeatShield authorization. What we do claim is that we match the right material to your flue type and document the condition before and after.
We’re also a chimney specialist, not a general handyman with a brush. Inspection, sweep and repair are handled by the same company, so you’re not handed off to a second contractor halfway through the job. That single-point accountability matters on HeatShield work, where a bad sweep can compromise a good resurfacing.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Fix in Davie
HeatShield systems fail in predictable ways, and Davie’s climate pushes several of them harder than most places. These are the problems we diagnose most often:
- Cerfractory delamination from a thin or damp application. When the resurfacing mix goes on too thin, or over a flue tile that was still damp or sooty, it lifts off in sheets instead of bonding. Those sheets block the flue and choke the draft, and it can happen after a single burning season. A camera inspection shows it clearly.
- Insulating-mix failure on exterior chimneys that never got waterproofed. Davie’s rain load is heavy from May through October. On an exterior chimney, water wicks through the brick and breaks the bond between the HeatShield mix and the tile. If a repair wasn’t paired with a crown and waterproofing fix, the leak comes back and takes the resurfacing with it.
- Voids where tile joints weren’t keyed and the flue was never re-inspected. If the original joints weren’t properly packed or the job was never verified afterward, gaps remain. Creosote and debris collect in those voids, and a Level 2 inspection will flag them. It’s one of the most common reasons a HeatShield job fails to hold up.
- Crown coating and joint sealant over active spalling or a failed crown. Sealing over a crown that’s already cracked, or over brick that’s actively spalling, traps the problem underneath. When it surfaces, the HeatShield system gets blamed for a masonry failure it never addressed.
- Dormant-flue blockages that look like resurfacing problems. A flue that sat unused since the last cold snap can pick up wasp nests, squirrels and birds, plus the leaf and debris drop that lands on Davie roofs. Restricted airflow mimics a failed lining. Sometimes the fix is a proper sweep, not a repair.
A homeowner with a wood-burning fireplace notices that after a season or two the draft has weakened, and a Level 2 inspection camera shows the cerfractory lining flaking off the flue tile in patches, usually because the original application went over a damp or sooty surface. A qualified local pro typically sweeps the flue first, documents the delamination, removes the loose material, and either re-applies the HeatShield system correctly with proper curing or recommends a reline or rebuild if the tile itself is compromised.
HeatShield Parts & Our Repair-vs-Replace Approach
We use genuine HeatShield cerfractory and insulating mixes for every resurfacing, joint repair and crown-coating job. We don’t stock or sell HeatShield parts, and we’re not a HeatShield dealer. What we do is source the right mix for your flue and refuse to substitute an aftermarket castable that looks similar but expands differently. The choice between repair and replacement comes down to the condition of the tile, not the budget.
If the flue tile is cracked through, or the chimney is spalling deeply, a HeatShield resurfacing won’t fix it. It’ll fail, and you’ll pay twice. We’ll tell you that plainly and price a rebuild or a DuraFlex reline instead. When the tile is sound and the preparation is right, a HeatShield resurfacing is a smart, less invasive repair. We only recommend it when the evidence supports it. Call (877) 798-7859 for a free estimate.
Our HeatShield Service Process – Step by Step
- 1
Level 2 inspection and diagnosis. A camera run through the flue shows the condition of the HeatShield lining, the tile joints, the crown and the flashing. We document what we find so you can see it.
- 2
Preparation. The flue is swept and cleaned before any repair. A castable system won’t bond to a sooty or damp surface, so this step is where most failed jobs went wrong. Loose material is removed.
- 3
Repair or application. We apply the HeatShield system at the correct thickness with the mix matched to the flue type, or repair the crown and waterproofing that caused the water intrusion in the first place.
- 4
Curing and testing. The resurfacing is allowed to cure properly, then the flue is checked for voids and draft is verified.
- 5
Documentation and warranty-safe follow-up. You get photos and a record of what was done, which protects your warranty and gives the next inspector a baseline.
See the difference
Before
After
Before
After
Before
AfterHeatShield Products We Service & Install in Davie
We work with the HeatShield product line across the range of repair needs a Davie chimney presents. That includes the HeatShield cerfractory flue sealant, a castable resurfacing mix used for flues in fair condition, and the HeatShield insulating mix for exterior or oversized flues that need extra protection against heat and moisture. We also handle resurfacing systems for flues that need a full interior restoration, joint-repair products for keying tile joints properly, and crown-coating products for chimney tops. We match the product to your flue, and we’re clear about which ones suit an exterior chimney in our humidity and which don’t.
We Also Service These Brands
HeatShield is one tool in the box, not the whole kit. We also work with DuraFlex flexible liner systems for full and partial relining, and Gelco products for the components a chimney needs to vent correctly. That product depth means a repair is matched to the right material for your flue instead of whatever’s on hand. If it turns out a reline is the honest answer, we’re not locked into selling a resurfacing.
FAQs – HeatShield Chimney Cleaning Service in Davie
No. We’re an independent HeatShield service provider, not a dealer, and we have no affiliation with or authorization from HeatShield. Our HeatShield expertise comes from hands-on work with the product line and its applications, not a manufacturer badge.
Yes. We use genuine HeatShield cerfractory and insulating mixes for resurfacing, joint repair and crown coating. Aftermarket castables don’t match the expansion and insulating properties, so we don’t substitute them. We don’t stock or sell HeatShield parts, but we source the right mix for your flue.
Most HeatShield resurfacing jobs take a full day, and the flue needs time to cure before you burn again. A diagnosis and sweep can often be done same day. The exact timeline depends on flue length and the condition of the tile, and we’ll tell you the schedule before you book.
We cover the cerfractory flue sealant, the insulating mix for exterior or oversized flues, resurfacing systems for full interior restoration, and joint-repair and crown-coating products. We match the product to your flue type and chimney design.
Proper service performed with genuine HeatShield materials and correct curing protects your warranty. Improper application or aftermarket materials can void it. That’s why we document the condition before and after and use the real mixes, so you have a record if a warranty claim ever comes up.
Typical HeatShield cleaning and inspection in Davie runs in a modest range, with resurfacing priced separately by flue length and condition. The written estimate sets the final price, and it’s free. Call (877) 798-7859 for an exact quote.
Resurfacing is enough when the flue tile is cracked but structurally intact. If the tile is cracked through or the chimney is spalling deeply, a reline or rebuild is the honest answer. We tell you which based on the camera inspection, not a sales target. Call (877) 798-7859 to book the inspection.
Almost always because it was applied too thin or over a damp, sooty surface. The mix bonds to contamination instead of tile and lets go in sheets. The fix is to remove the loose material and re-apply correctly with proper prep and curing.
Yes, but only if the waterproofing and crown are addressed first. Davie’s rain load wicks through exterior brick and breaks the bond of an insulating-mix repair that wasn’t paired with a crown fix. We sequence the crown and waterproofing before the resurfacing.
No. Crown coating seals a crown; it doesn’t repair spalling brick underneath. Coating over active spalling traps the problem and makes it worse. We address the masonry first, then coat.
Once a year, the same as any flue. Resurfaced flues benefit from an annual camera check because early delamination is easy to catch and cheap to fix. Call (877) 798-7859 to schedule.
Book Your HeatShield Service in Davie, FL
If you’ve got a HeatShield lining that’s flaking, drafting poorly, or simply hasn’t been looked at in years, a Level 2 inspection with a camera will tell you what’s actually going on. We’ll show you what we find, explain your options, and give you a free written estimate on the spot. Call (877) 798-7859. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free.
Written by the team at Chimney Sweep Davie.