Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Hollywood, FL
We provide independent Gelco service across Hollywood, and the difference here is coastal. Most of what we inspect on Gelco vents in this city is metal fighting salt air, not creosote buildup. Hollywood’s beachside blocks age single-wall galvanized vents fast, and a Gelco cap that’s still hanging on back in Davie can be rusted through near the ocean. Our technicians have up to 12 years of experience reading that kind of wear. Call (877) 798-7859. We answer 24/7.

Why Hollywood Residents Choose Us for Gelco Service
We’re an independent Gelco service provider. We’re not affiliated with the manufacturer and we’re not authorized by them, which means our advice about your vent comes from what we find on the roof, not from a sales sheet. That independence matters in Hollywood, where the honest answer to “does this need replacing?” often depends on how much salt exposure the metal has seen.
We know the Gelco GA Series, GX Series, Direct Vent and B-Vent products, and we know how they fail in subtropical humidity. When a cap or damper needs a part, we use OEM Gelco components when they’re available for critical pieces and quality aftermarket parts for universal items. Either way, the part fits the vent it’s going on.
Scheduling is straightforward. Tell us what you’re seeing, and we’ll book a visit. You get a written estimate before any work starts, and the same team that inspects is the one that does the repair.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Hollywood
These are the failures we run into most often on Gelco systems around Hollywood, and each one ties back to something specific about this city.
- Salt-air rust-through on single-wall vents and caps. Along the beachside blocks, salt in the air eats galvanized steel from the outside in. A vent that looks fine from the ground can have thin, pitted walls where the cap meets the pipe. We check metal thickness and seams, not just what’s visible.
- Pest nesting in unused flues. Lizards, birds and wasps move into vent openings when a cap is loose, cracked or missing. In a climate with no real heating season, a flue can sit untouched for months, which gives pests all the time they need. A properly fitted Gelco cap closes that door.
- Crown and mortar deterioration. Subtropical humidity and salt exposure work on masonry crowns and mortar joints year-round. Small cracks let water in, and water plus sun does the rest. We reseal or rebuild crowns before the damage reaches the flue.
- Damper seizure and firebox rust in gas fireplaces. A gas fireplace that goes unused through the long warm months collects moisture. Dampers stick, firebox metal rusts. We free and service dampers and treat the rust before it spreads.
- Rusted-through vent sections. When corrosion has compromised a section of vent, we replace that section with corrosion-resistant material rather than patching over it. Safety and draft come first; cosmetic shortcuts don’t hold up near the coast.
Gelco Service in Hollywood: What Local Conditions Mean for Your Equipment
Here’s the thing about Hollywood that changes the job. Many “chimneys” on the 1950s and ’60s homes in the 33019 beachside blocks aren’t masonry chimneys at all. They’re single-wall galvanized vents, and salt air rusts them through from the outside. So a call that starts as a chimney cleaning often turns into cap replacement and vent-section work, because there’s no creosote to sweep in a vent that never carried wood smoke. That’s the local reality.
What it means for Gelco owners is that inspection matters more than sweeping. We look at the cap, the termination, the seams and the metal itself. A typical job follows a familiar pattern: a homeowner notices rust stains or pest activity around a vent, we get up top, find the galvanized pipe has corroded through from salt exposure, and the cap is damaged or gone. The usual fix is replacing the rusted section with a corrosion-resistant vent and fitting a new multi-flue cap to keep pests and rain out.
Inland, in the older 33020 and 33021 grid, the wear is a little slower but the humidity is the same. Caps loosen, dampers seize, pests find the gaps. Different blocks, same underlying causes.
Gelco Models & Products We Service in Hollywood
We work on the Gelco GA Series, GX Series, Direct Vent and B-Vent products found on Hollywood homes, plus the caps, dampers and venting components that go with them. A Gelco cap is a cap, and its job is to keep water, pests and debris out of the flue while letting exhaust escape cleanly. Matching the right replacement comes down to the vent type, the diameter and how exposed the roof is to salt air.
That’s where quality parts matter. A cheap universal cap on a beachside vent can fail within a couple of seasons. We match the part to the system, and we tell you plainly when a repair will hold and when replacement is the honest call. To see how our Gelco work fits the wider picture, look at our Gelco service page.

See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Hollywood
Gelco service in Hollywood is priced per job, set by a written estimate before we start. We don’t quote over the phone and we don’t pad the bill with fees. The free estimate lays out exactly what’s wrong and what the fix involves, so you can decide with the numbers in front of you.
What drives the cost is straightforward: how much corrosion we find, whether a cap or a whole vent section needs replacing, roof access, and whether it’s a simple inspection or a repair. We never recommend work you can’t verify. If the vent is sound and only needs a clean and a cap check, that’s what we’ll tell you, even when a bigger job would pay better.
Call (877) 798-7859 for an exact quote. Estimates are free.
Serving Hollywood, FL – Our Local Coverage Area
We serve Hollywood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Hollywood
Once a year is the right rhythm for most Hollywood homes, and coastal properties should lean toward the same schedule because salt air ages metal faster than inland conditions do. An annual look catches rust and pest intrusion before they become repairs. Call (877) 798-7859 to book an inspection.
Rust stains on the exterior, flaking metal, pitting at the seams and a cap that’s loose or crumbling all point to salt corrosion. If you can see rust running down the vent, get it checked. Call (877) 798-7859 and we’ll tell you whether it’s a repair or a replacement.
Yes. We service Gelco gas fireplaces, including seized dampers, rusted firebox components and venting that’s drawing poorly. Gas work stays in the hands of trained technicians, and a fireplace that smells off or won’t draft right should be inspected before it’s used again. Call (877) 798-7859 to schedule.
Yes. Many associations in Hollywood require annual dryer-vent documentation for insurance, and we can provide written records of the work. If your building asks for proof, we’ll make sure you have it. Call (877) 798-7859 to arrange the visit.
A corrosion-resistant multi-flue cap that seals against pest and water entry is the best fit for salt-air exposure, and the right one depends on your vent type and roof layout. We’ll recommend a cap matched to your Gelco system and confirm it holds up to the coastal conditions. Call (877) 798-7859 for a free estimate.
Service Areas Near Hollywood
We serve homeowners throughout Hollywood and the surrounding communities, including Davie, Boulevard Gardens, Washington Park, Franklin Park, Medley and El Portal.
Book Your Gelco Service in Hollywood Today
Whether your Gelco vent needs a cap, a repair or a full inspection before storm season, we’ll give you a straight answer and a free written estimate. No pressure and no guessing. Call (877) 798-7859. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Davie.