Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Davie Homeowners Choose DuraFlex Chimney Cleaning
We provide independent DuraFlex chimney cleaning and service in Davie, FL. That means we inspect, sweep and repair DuraFlex flexible stainless steel liners without any manufacturer authorization, so our only interest is getting your liner and flue back to safe, working condition. We know how these liners behave in South Florida’s humidity and wind-driven rain, and we match every repair to parts that fit the system properly.

DuraFlex makes a flexible stainless steel chimney liner, and those liners sit in Davie chimneys through months of disuse, damp air and storm-season debris. We handle Level 2 inspection, creosote removal and cap replacement on DuraFlex systems across Davie, from the ranch homes on large lots to the newer executive communities. Chimney Sweep Davie is an independent service provider and is not affiliated with or authorized by DuraFlex. Call (877) 798-7859 to book a Davie visit.
Why Trust Chimney Sweep Davie for Your DuraFlex Chimney Cleaning?
Our technicians have up to 12 years of experience, and that time shows up in how we read a DuraFlex liner. A flexible stainless liner doesn’t fail the way a masonry flue does. Its seams and corrugations hold onto whatever the fire leaves behind, and in Davie’s humid air that trapped material turns acidic. Knowing where to look for that damage is most of the job.
We work with DuraFlex systems using quality parts that fit them: stainless components and listed connectors, not generic hardware-store pieces that almost fit. That matters for warranty-safe service. When a liner is swept with the right brushes for its wall profile and its top termination is re-secured properly, you keep the system as close to its intended condition as the installation allows. We don’t claim to be a DuraFlex dealer, and we don’t sell “genuine” or OEM parts. What we do is service and repair DuraFlex equipment honestly, with materials matched to the flue and the appliance.
One team handles the whole arc in Davie: the inspection that finds the problem, the sweep that clears it, and the repair that fixes what the creosote left behind. No handoff, no second contractor guessing at what the first one saw. Call (877) 798-7859 for a free estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Fix in Davie
These are the DuraFlex issues we run into most in Davie, and what usually causes each one.
- Pitting and pinhole corrosion in the liner walls. Flexible liner seams and corrugations trap acidic condensate and creosote, and Davie’s humid air keeps that mixture wet far longer than a dry climate would. Over time the stainless pits, and pinholes follow. Once corrosion goes through the wall, a sweep alone won’t restore the liner.
- Water intrusion behind the cap at the crown. A liner top that wasn’t properly secured lets wind-driven rain run behind the cap and down the outside of the liner. The top section rusts first, and the damper assembly often follows. Davie’s afternoon thunderstorms push water at angles a loose termination can’t handle.
- Crushed or kinked liner-to-appliance connectors. On tight offsets, a connector that gets bent too sharply restricts draft and speeds up soot buildup right at the appliance. A smoky smell or weak fire is a common sign. The fix is usually re-making the connection cleanly, not replacing the whole liner.
- Insulation wrap breakdown on exterior runs. Where a chimney runs on an exterior wall, the insulation wrap around the liner takes the brunt of heat cycling and moisture, and it can break down. That creates hot spots and reduces the clearance protection the wrap was there for. It’s a repair-stage issue a routine sweep won’t catch unless someone inspects the run.
- Wildlife and nest blockages in dormant liners. A DuraFlex flue that sat unused through the warm months is exactly where birds, squirrels and wasp nests settle. The liner itself may be fine, but the blockage kills draft and can push exhaust back into the room. Clearing it is part of the sweep, and a proper cap keeps it from happening again.
DuraFlex Parts & Our Repair-vs-Replace Approach
We choose DuraFlex-compatible stainless components and listed connectors rather than whatever generic hardware is on hand. The part has to match the liner’s profile, the appliance it serves and the way it terminates at the crown. A cap that fits loosely or a connector that crushes on an offset undoes the rest of the work.
Deciding between repair and replacement comes down to evidence. A loose top plate, a failed cap, a kinked connector or worn insulation wrap can usually be corrected, and we say so when that’s the case. A corroded liner is different. Patch repair on a pitted flexible liner rarely passes a Level 2 inspection, because the corrosion continues behind whatever covers it. When we see through-wall pitting, honest replacement with a properly sized, insulated liner is usually the right call. We’ll show you the camera findings and the photos so you can weigh it yourself. Call (877) 798-7859 to set up the inspection that starts that conversation.
Our DuraFlex Service Process – Step by Step
- 1
Diagnosis. We start with a Level 2 inspection of the DuraFlex system. Camera work looks at the liner walls, the seams and corrugations, the top termination and the connector at the appliance. In Davie, we’re also checking for moisture corrosion at the top and any blockage left over from the dormant season.
- 2
Sweep and repair or install. Creosote comes off with poly brushes or rotary tools matched to the liner’s wall profile, so a smooth-wall liner and a corrugated one each get the right treatment. Then we replace the cap or top plate, re-secure the termination, or move to relining if the inspection calls for it.
- 3
Test. We check draft at the appliance, confirm the termination is sealed against wind-driven rain, and verify the liner and connector are clear and properly connected.
- 4
Documentation. You get the inspection findings and photos that support whatever we recommend. If a warranty question comes up with the manufacturer, that record is what you’ll want.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Products We Service & Install in Davie
We service and install the kinds of DuraFlex products that turn up in Davie homes. That includes the DuraFlex SW Smooth Wall Flexible Stainless Liner, the DuraFlex Pro Flexible Stainless Liner, the DuraFlex Rigid Stainless Liner Kit and the DuraFlex Insulated Flex Kit. Each one brings its own service reality. Smooth wall liners sweep more cleanly and hold less creosote in the wall itself. Corrugated flex liners trap more in the corrugations and need a more careful touch with the brush. Rigid sections and insulated kits call for attention to the joints and the wrap. We don’t claim to stock or order these products. We service what’s already in your chimney and install replacements where the inspection supports it.
We Also Service These Brands
We’re not a single-brand shop. Alongside DuraFlex, we work with HeatShield flue resurfacing systems and Gelco components, plus other recognized chimney product lines. That matters when your Davie chimney needs a repair that a single brand can’t cover, or when a resurfacing system and a liner have to work together. We match the material to the flue instead of forcing one product into every job.
FAQs – DuraFlex Chimney Cleaning Service in Davie
No. We are an independent DuraFlex service provider and are not affiliated with or authorized by the manufacturer. That independence is the point: our only interest is getting your liner and flue back to safe, working condition, and we tell you what the inspection shows regardless of brand. Call (877) 798-7859 for a free estimate in Davie.
Yes. We use DuraFlex-compatible stainless components and listed connectors matched to your liner’s profile, appliance and termination. We don’t use generic hardware-store pieces, and we don’t claim to sell genuine or OEM DuraFlex parts. Fitting the right part to the system is what keeps the repair sound.
Most DuraFlex sweeps and inspections in Davie are done in a single visit, with time added if the liner needs a cap replacement or other repair. A full reline takes longer. We set the scope from the inspection findings and confirm the work before anything starts.
We cover DuraFlex flexible and rigid stainless liners and insulated flex kits, including the SW Smooth Wall Flexible Stainless Liner, the Pro Flexible Stainless Liner, the Rigid Stainless Liner Kit and the Insulated Flex Kit. If you’re not sure what’s in your chimney, the inspection will tell us.
Proper service with the right brushes and properly fitted parts doesn’t work against your warranty, and it protects you if a manufacturer question ever comes up. We’re independent, so we can’t speak for DuraFlex, but we document what we find and what we do. Call (877) 798-7859 if you want to review that before booking.
Pricing is set per job by a written estimate after we see the liner, so the number reflects your system, not a flat guess. A straightforward sweep and inspection sits lower than a cap replacement or reline. Call (877) 798-7859 for an exact quote. Estimates are free.
It can, but a standard brush sized for masonry isn’t always the right tool for a flexible liner. The wall profile and the corrugations decide which brush or rotary tool removes creosote without abrading the stainless. Choosing wrongly is how a flexible liner gets scratched and weakened.
Sweeping clears buildup; it can’t restore stainless that has already pitted through. If a Level 2 inspection shows through-wall pitting near the top or at the seams, a new insulated liner is usually the honest answer. If the corrosion is surface-level and the termination is sound, a sweep and repair can be enough. The camera findings tell us which case you’re in.
A properly fitted, securely attached cap and top plate stop most wind-driven rain from running behind the liner at Davie’s crown. It won’t fix corrosion that’s already started, but it prevents the top section and damper from getting wet again. The inspection shows whether the water is coming in at the cap or somewhere else.
Yes. A smooth-wall liner holds less creosote in the wall and sweeps more cleanly. A corrugated flex liner traps it in the corrugations, so the cleaning needs a more careful touch to get it out without abrading the stainless. That’s the practical difference between the two on a Davie sweep.
It does. An insert liner has its own wall profile, its own connector at the appliance, and its own top termination, and each of those is checked separately from the flue walls. A masonry flue is swept as a solid shaft. The routine for a DuraFlex insert liners is built around the liner and the appliance rather than the surrounding masonry.
Book Your DuraFlex Service in Davie, FL
If your DuraFlex liner needs a sweep, a Level 2 inspection or a cap replacement, book a visit in Davie. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (877) 798-7859 for a free estimate, and we’ll tell you plainly whether your liner needs a sweep, a repair or a replacement.
Written by the team at Chimney Sweep Davie.