Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Davie?
Chimney repair in Davie typically runs $350 to $1,500, with most common jobs – a cracked crown, a damaged cap, or tuckpointing on a mortar joint – landing between $450 and $850. Larger structural work like a full flue reline or a rebuilt chimney top runs higher. Every job is priced per job by a written estimate, and we give that estimate free.
What you pay depends on what’s actually wrong inside the flue, not on how the fireplace looks from the living room. We inspect first, then tell you exactly what the repair is and why the number comes out where it does.
Call (877) 798-7859 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical Davie chimney repair: $350 to $1,500; most single-issue jobs sit in the $450 to $850 range.
- Flue relining with DuraFlex or HeatShield resurfacing is the biggest single cost, usually $1,200 to $3,500.
- Davie’s rainy summer season and humid air speed up mortar and crown deterioration, so repairs that would wait a decade elsewhere come up sooner here.
- Estimates are free and the price is set per job by the written estimate – no service-call fee, no diagnostic charge.
- Our technicians have up to 12 years of experience, and we work with established chimney product lines including DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield.
Chimney Repair Cost Breakdown (2026)
These are typical estimated ranges for the Davie market in 2026. The written estimate sets the final price for your chimney.
| Repair | Typical Estimated Range | What It Covers |
|---|---|---|
| Chimney cap replacement | $250 – $600 | New cap, sealing, and fit to the flue opening; Famco and Copperfield components commonly used |
| Crown repair (cracked or spalling) | $350 – $750 | Crown patching or rebuild with proper slope so water sheds off |
| Tuckpointing / mortar joint repair | $400 – $900 | Grinding out and repacking deteriorated mortar joints; priced by the area affected |
| Flashing repair | $300 – $700 | Resealing or replacing the flashing where the chimney meets the roof line |
| Damper replacement | $350 – $800 | Top-mount or throat damper replacement, including Famco and Copperfield units |
| HeatShield flue resurfacing | $1,200 – $2,800 | Resurfacing a cracked or pitted clay flue liner rather than removing it |
| Partial or full reline (DuraFlex) | $1,800 – $4,500 | Stainless flexible liner installed inside a deteriorated flue; full reline at the top of the range |
| Chimney top rebuild | $1,500 – $5,000 | Rebuilding the top courses of masonry above the roof line |
| Inspection and sweep before repair | $150 – $350 | Diagnostic sweep so we know what we’re repairing before we quote it |
A few things push a Davie chimney job up or down. Height matters more than most homeowners expect: a chimney that needs scaffolding or roof access over a second story costs more than a one-story job with a short stack. The condition of the flue interior matters most of all, because a hairline crack in a clay tile that can be resurfaced is a very different repair from a flue that has to be relined top to bottom. Material choice plays a role too – we work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield product lines, so the repair is matched to the right material for the flue type rather than whatever a generalist has on hand. And the age of the masonry itself tells you a lot. On a chimney past its first few decades, one repair often reveals a second issue that’s already in progress.
What Affects Chimney Repair Pricing in Davie
- Our rainy season. Davie’s long, wet summers put more water on masonry than the same chimney would see in a drier climate. Water is the biggest single cause of cracked crowns, spalling brick, and failed mortar joints, which is why crown and tuckpointing work comes up often here and why a small crack is worth fixing before the season arrives.
- Humidity on the masonry. Sustained humidity keeps brick and mortar damp longer, and damp mortar doesn’t shed water the way dry mortar does. That’s part of why flashing and crown repairs on older Davie homes get made before the joints start letting water behind the brick.
- Flue condition. A cracked clay tile that can be resurfaced with HeatShield costs far less than a flue that needs a full DuraFlex liner. We only know which after an inspection, and the inspection is why we don’t quote a repair over the phone.
- Chimney height and roof access. A taller stack, a steeply pitched roof, or tight access around the chimney affects labor. This is one of the biggest swing factors between two jobs that look similar from the ground.
- Wood-burning versus gas. Wood-burning fireplaces and gas inserts have different flue requirements and different failure points. A gas insert’s venting components – often Famco or Copperfield parts – are replaced rather than rebuilt, and that changes the line items.
- Age and construction of the chimney. An older masonry chimney that’s been through decades of wet and dry cycles takes more work to bring back than a newer one. Where a chimney has already been patched before, the previous repair has to come off before the new one goes on.
A chimney inspection isn’t a formality – it’s how we find the problem before it becomes a fire risk. If we’ve swept your chimney and come back with a repair quote, the number is based on what the flue actually looks like, not a guess. Sweeping removes creosote. Repair addresses what creosote leaves behind.
How to Save on Chimney Repair
The single biggest saving on chimney repair isn’t a discount – it’s catching the problem while it’s small. A cracked crown repaired in one visit is a few hundred dollars. Water that gets past that crown for a season can work into the brick and push the repair into four figures. If you’ve heard a change in how your chimney sounds when it rains, that’s the time to act.
A few practical things that help:
- Watch the crown and the flashing first. Those two are the entry points for most water damage. Anything spalling – flaking brick, crumbling mortar, a shifting cap – is cheaper to fix now than after a summer of rain.
- Get the sweep done before the repair quote. A chimney that’s actually clean is easier to inspect, and the inspection tells us exactly which repair you need – not a list of everything a general contractor could sell you.
- Consider resurfacing before relining. Where the flue can be resurfaced with HeatShield, that’s a fraction of the cost of a full DuraFlex reline. Not every flue qualifies, but the inspection tells us which is the right call.
- Ask for the repair to be matched to the material. A repair that fits the flue type lasts longer than one patched with general-purpose materials. We match the product line to the flue, not the other way around.
- Get a free estimate before committing. Call (877) 798-7859. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Whether you’re deciding between a repair and a full rebuild, or you just want to know what’s actually wrong, an inspection gives you the number. We don’t quote a repair before we’ve seen the flue. That’s the part that saves most homeowners money in the long run – the difference between a repair that holds and one that has to be redone.
If you’re looking for a chimney sweep Davie can rely on, the same team that inspects your chimney handles the repair, so there’s no handoff to a second contractor. And if the work turns out to be routine rather than structural, we’ll tell you that too. For a straight read on your chimney, book chimney repair with us – the inspection comes first and the written estimate sets the final price. From the firebox to the crown, one team handles the full job.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Davie?
Chimney repair in Davie typically costs $350 to $1,500, with most common repairs in the $450 to $850 range. Crown repairs, cap replacement, tuckpointing, and flashing work sit in that band; full relines and top rebuilds run higher. Call (877) 798-7859 for an exact quote – estimates are free.
Is it cheaper to repair or replace my chimney?
Repair is almost always cheaper than replacement, and on most Davie chimneys a targeted repair is the right call. A resurfaced flue with HeatShield or a partial DuraFlex reline runs a fraction of a full chimney rebuild – typically $1,200 to $2,800 for the surface repair versus $1,500 to $5,000 for a top rebuild. Replacement only makes sense when the structure itself is failing, which the inspection will show. Call (877) 798-7859 and we’ll tell you which side of that line you’re on. Estimates are free.
How much does a chimney crown repair cost in Davie?
A chimney crown repair in Davie typically runs $350 to $750, depending on how much of the crown is affected and how tall the chimney is. A crown that’s patched early costs less than one that’s let water in for a season. Call (877) 798-7859 for an exact quote – estimates are free.
Can you come today?
Yes, in most cases we can get a technician out the same day you call. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (877) 798-7859 and we’ll get you booked.
Do you charge a service-call or diagnostic fee?
No. The estimate is free and the price is set per job by the written estimate – there’s no service-call fee, no diagnostic charge, and no trip charge. Call (877) 798-7859 to book a free estimate. Estimates are free.
Why does a full flue reline cost more than a repair?
A full flue reline costs more because it’s a structural repair, not a patch. A DuraFlex flexible liner installed inside a deteriorated flue runs $1,800 to $4,500 and protects the flue top to bottom, rather than resurfacing one cracked section. Where a flue can be resurfaced with HeatShield instead, the typical range is $1,200 to $2,800 – a significant saving. Call (877) 798-7859 and we’ll tell you which your flue actually needs. Estimates are free.
Pricing reflects the Davie market as of 2026. Chimney Sweep Davie offers free estimates – call (877) 798-7859.
Written by the team at Chimney Sweep Davie.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Carmen Mendoza"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Chris Sullivan"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Stephanie Anderson