Chimney Repair in Washington Park, FL | Chimney Sweep Davie

Chimney Repair in Washington Park - Inspected on Camera, Then Priced in Writing

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Washington Park

If you’re in Washington Park and your fireplace is misbehaving, the cause is usually water, not fire. Most of the homes here were built in the postwar years without a chimney at all; the ones that have one are working with a small, older collection of brick and block chases plus the stucco-clad chases added during later renovations. Those assemblies take a specific kind of attention, and that’s the work we do.

Call (877) 798-7859

We handle chimney repair in Washington Park from the firebox to the crown with one team. Our technicians have up to 12 years of experience, and they know that a smell of smoke in December, a seized damper in July, or a flue full of nesting material is rarely a burning problem. It’s months of subtropical damp doing quiet damage.

Call (877) 798-7859 to book a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Washington Park Homeowners Call Chimney Sweep Davie for Chimney Repair

The honest answer to “why us” in Washington Park is narrower than a sales pitch. We’re a chimney specialist, not a general handyman with a brush on the truck. Inspection, sweeping and repair are all handled by the same team, so nobody hands the diagnosis off to a second contractor who has to start over.

We work with established chimney product lines, including chimney repair materials from DuraFlex, HeatShield, Olympia Chimney, Gelco, Famco and Copperfield. That means a cracked clay flue gets matched to the right liner, not to whatever happens to be in the shop. It also means a HeatShield resurfacing is on the table when a full reline isn’t necessary, which is a repair method well beyond standard sweeping.

We know this neighborhood. Washington Park is unincorporated Broward County, and the housing stock tells you what you’ll find: 1950s through 1970s single-story concrete-block homes with stucco on the outside and asphalt shingle overhead. When we’re booked in Washington Park and the surrounding blocks, we know to look for a stucco chase instead of a brick stack, and to expect an attic crawl if the chase has no exterior cleanout.

Our technicians have up to 12 years of experience with exactly this kind of assembly. Ask us what we’ll be doing before we do it, and we’ll explain it in plain terms. Call (877) 798-7859 for a free estimate.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cap Replacement in Washington Park

Chimney Cap Replacement in Washington Park is one of the two repairs we’re asked for most, and it’s where a lot of the water damage starts. A cap does two jobs: it keeps rain out of the flue and it stops birds, squirrels and insects from moving in. In the humid South Florida climate, a rusted or partly missing cap is a standing invitation for water to sit on the crown and work its way into the flue tile.

When a Washington Park homeowner needs cap replacement, the signs usually show up as a water stain on the ceiling near the chase, a chewed or blocked screen, or a flue full of nest material discovered on inspection. A typical cap replacement in Washington Park runs $250 to $600, depending on the flue size, the cap type and whether the crown needs minor repair at the same time. Famco caps and other established brands are what we work with.

What the job involves

We remove the old cap, check the crown and the top of the flue for cracks or spalling, and install a correctly sized cap fitted to the flue opening. If the crown is already failing, we’ll flag it before the new cap goes on. The written estimate sets the final price.

Signs you’re due for a new one

Rust streaks on the chase, a cap sitting crooked after wind-blown rain, or a screen that’s rusted through. If you’ve found bird or rodent nests in the flue, the cap is usually the reason. Call us to look before the next storm, not after.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (877) 798-7859

Chimney Liner Installation in Washington Park

Chimney Liner Installation in Washington Park is what we recommend when a flue can’t do its job safely as it is. In the postwar chases we see here, the usual culprit is cracked or spalling clay flue tile, often from years of moisture and humid air rather than heavy burning. A damaged liner lets heat and carbon monoxide reach the structure around the flue.

When a Washington Park homeowner needs a liner, it’s usually because a sweep or inspection found cracked tile, a flue that’s too small for the appliance, or a chase with no working liner at all. A typical stainless liner installation in Washington Park runs $2,400 to $5,800, depending on flue length, liner diameter and whether the chase has an exterior cleanout. DuraFlex and Olympia Chimney systems are what we install. Where the tile is degraded but still serviceable, HeatShield resurfacing may be a lower-cost option; where the flue is badly broken, a full reline is the honest call.

Full reline versus resurfacing

HeatShield resurfacing smooths and seals a cracked but structurally intact flue. A flexible stainless liner, such as a DuraFlex system, provides new structural service for a deteriorated or missing flue. Which one applies is a camera-inspection question, not a preference.

Getting to the flue

Many Washington Park chases were built without an exterior cleanout, so the technician may have to reach the flue through a low-clearance 1950s attic. That access is slower and affects the quote. We’ll tell you upfront what the access involves.

Trusted Brands We Service in Washington Park

We work with established chimney industry product lines: Gelco, Olympia Chimney, Famco and Copperfield, along with DuraFlex and HeatShield for liners and flue resurfacing. These are the materials professionals use, and matching the component to your flue type matters more than reaching for the cheapest part available. We source the right component for the job and keep turnaround moving. We don’t stock parts on a truck or run a warehouse, so we won’t promise a same-hour fix; but we can get the correct part quickly once the inspection has shown what’s needed.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (877) 798-7859

Common Chimney Repair Problems We See in Washington Park Homes

  • Water entry at the chase penetration. Many roof and chase penetrations in Washington Park are flat-sealed with mastic or stucco instead of proper flashing, so hurricane-driven rain and humid air get in for months. That’s what rusts components and cracks the flue tile.
  • Dormant flues and seized dampers. Fireplaces here sit dormant nine months out of the year. When a homeowner lights one for the first cold snap, the damper that moved fine two years ago now sticks, and the flue may have pests or a nest.
  • Dense creosote on wood stoves assumed to be decorative. Wood stoves and rarely-used fireplaces can carry thick first- and second-degree creosote. Homeowners assume the fireplace is decorative and safe because it’s rarely used; the buildup is exactly why it isn’t.
  • Chases with no exterior cleanout. When the only way to the flue is through a 1950s low-clearance attic, liner and damper work gets slower. The quote reflects it.

A typical Washington Park repair begins with a first-December call about smoke rolling back into the room. On inspection we often find spalling clay flue tile, a degraded crown, or a mastic-sealed penetration that’s been letting rain in all hurricane season. The fix usually lands on a cap, crown or flashing repair, a liner, or a HeatShield-resurfaced flue, plus guidance on burning dry wood so creosote stays first-degree.

Pricing for Chimney Repair in Washington Park, FL

What you’ll pay in Washington Park is set by the written estimate, not by a phone quote. Still, here are honest ranges so you can sanity-check a bid: cap replacement typically runs $250 to $600. Crown repair or rebuild typically runs $400 to $1,200. Flashing repair on a stucco chase runs $600 to $1,500. Tuckpointing runs $600 to $1,800 depending on square footage. Spalling brick repair runs $500 to $1,500. A rebuilt chase runs $3,500 to $9,000. Liner installation runs $2,400 to $5,800. What moves the number is access, whether the chase has a cleanout, and how much repair the camera inspection shows is actually needed.

Every estimate is free, and the written estimate sets the final price. We don’t guess at what a flue needs; we inspect, show you the evidence, and price the job from there. Call (877) 798-7859.

We Also Serve Cities Near Washington Park

We schedule chimney inspection, sweep and repair work in Washington Park and in the towns around it, including Boulevard Gardens, Franklin Park, Davie and Hollywood. If you’re on the edge of one of those and not sure you’re covered, call and we’ll confirm. The link below takes you to our general Washington Park area page for more detail. Call (877) 798-7859 to book.

Serving Washington Park, FL – Our Local Coverage Area

We serve Washington Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Washington Park

Why Washington Park Chooses Chimney Sweep Davie

We set the standard for chimney repair in Washington Park.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Washington Park

Getting your chimney repair project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney repair project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Washington Park Customers Say

Trusted by homeowners across Washington Park and surrounding areas.

★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Carmen Mendoza
★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Chris Sullivan
★★★★★

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

Stephanie Anderson

Ready for Chimney Repair in Washington Park?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Washington Park.

(877) 798-7859

Request a Free Estimate in Washington Park

Tell us about your chimney repair needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - We Answer 24/7