Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Medley
Most chimney repair calls in Medley start with a storm, not a cold snap. We work on the ornamental and gas-appliance flues that sit on the older homes tucked among the warehouse and trucking yards here, where wind-driven rain and year-round humidity do far more damage than fire ever does. If a cap blew off or a ceiling stain appeared after the last band of weather moved through, call (877) 798-7859. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Medley Homeowners Call Chimney Sweep Davie for Chimney Repair
Medley is a small municipality where the residential stock sits in pockets around industrial parks, trucking terminals, and yard-based businesses. That shapes the work. A flue here is usually a vent termination on a subtropical house, not a wood-burning chimney that sees a fire every winter. We diagnose it that way, and we look for the failures this climate actually produces: displaced caps, failed flashing, rusted dampers, spalling brick.
Our technicians have up to 12 years of experience, and we handle inspection, sweep, and repair under one company, so the same team that finds the problem is the one that fixes it. For Medley homeowners who want a specialist rather than a generalist with a brush, that matters. Severe weather doesn’t wait for a convenient week, and neither should a diagnosis.
We serve Medley and the neighborhoods around it, including the 33016 homes near the warehouse corridors and the smaller residential parcels along the trucking routes. If a chimney crown cracked or a cap went missing in high wind, we know where to start looking first.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Masonry Repair in Medley
Chimney Masonry Repair in Medley usually centers on water damage, not fire damage, because year-round subtropical humidity and storm-driven rain wear masonry down faster than any flame. A typical masonry repair here runs $450 to $1,800, depending on how much brick and mortar the job touches. Spalling brick, cracked mortar joints, and a crown that has pulled away from the flue are the usual findings. Call (877) 798-7859 for an exact quote, since the written estimate sets the final price.
Repointing and Tuckpointing
When mortar joints erode, water finds its way behind the brick. Repointing cuts out the loose mortar and packs new material into the joint so the wall sheds water again. Tuckpointing does the same work on a finer scale, matching the profile so the repair blends with the surrounding masonry.
Crown and Brick Restoration
The crown is the concrete cap at the top of the chimney, and it cracks as it moves with heat and moisture. A cracked crown lets water straight down the flue. We rebuild or resurface it, then replace any spalling brick below so the whole stack holds together through the next storm season.
Chimney Cap Installation in Medley
Chimney Cap Installation in Medley is one of the most common jobs we run, because hurricane-season wind tears caps off and rain then blows straight into the flue. A cap installation typically runs $200 to $550, sized to the flue and set with proper fastening. When you have an ornamental or gas-appliance flue rather than a wood-burning chimney, the cap is the piece that keeps the whole system dry. Call for a free estimate.
Sizing and Sealing the Cap
A cap that’s the wrong size rattles, rusts, or fails to keep water out. We match the cap to the flue opening and seal the joints so wind-driven rain can’t work its way past the edge. Gelco and Copperfield components are the sort of professional-grade parts we work with here.
Storm-Ready Fastening
Fastening is what separates a cap that survives a storm from one that ends up in the yard. We set the cap so it stays put under high wind, and we check the flue termination below it while we’re up there. If the crown needs attention, we catch it in the same visit.
Trusted Brands We Service in Medley
We work with established chimney industry brands, including DuraFlex for flexible liner systems, HeatShield for flue resurfacing, Gelco, and Copperfield for dampers, caps, and venting components. These are the product lines professionals use, not big-box substitutes, and matching the right material to the flue type is how a repair lasts. We don’t claim to stock parts locally; we order what the job calls for, which keeps turnaround quick and the fit correct. From a simple cap replacement to HeatShield resurfacing on a cracked liner, the product line is chosen to fit the diagnosis, not the other way around.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Medley Homes
- Caps torn off or displaced by hurricane-season wind. When a cap goes missing, rain blows straight into the flue and stains the firebox. This is the single most common repair driver on Medley’s older residential parcels.
- Flashing seal failure around a flat or low-slope roof. Water works past the flashing and shows up as a ceiling stain near the fireplace rather than an obvious leak at the chimney. The roof penetration, not the flue, is usually the source.
- Rusted, stuck dampers from year-round humidity. Subtropical air corrodes damper hardware even in a house that rarely sees a fire. A damper that won’t move is a humidity problem, not a soot problem.
- Spalling masonry and cracked crowns. Constant moisture cycling wears brick and mortar down. By the time a chunk of brick falls, the crown above it has usually been letting water in for a while.
Pricing for Chimney Repair in Medley, FL
Estimates are free, and the price is set per job by the written estimate, so the ranges below are typical, not final. A cap installation in Medley usually runs $200 to $550. Flashing repair around a roof penetration typically lands at $250 to $650. Masonry repointing and tuckpointing commonly run $450 to $1,800, with crown restoration at the upper end. A partial or full reline with DuraFlex flexible liner systems runs higher, typically $1,800 to $4,500, and HeatShield resurfacing of a cracked liner is quoted separately once we’ve inspected the flue. What moves the number is access, how far the moisture damage spread, and whether the flue is masonry or a vent termination. Call (877) 798-7859 for an exact quote, and we’ll tell you plainly when a repair can safely wait.
We Also Serve Cities Near Medley
Our chimney repair team works across Medley and the surrounding communities, including Virginia Gardens, El Portal, Pembroke Pines, and Hollywood. The same subtropical storm exposure that drives cap and flashing repairs here shows up across northwest Miami-Dade and into Broward. If you’re just outside Medley, call and we’ll confirm coverage.
Serving Medley, FL – Our Local Coverage Area
We serve Medley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Medley
Yes. In Medley, an inspection isn’t about creosote so much as the flue itself: caps, flashing, crowns, dampers, and moisture. A flue that rarely sees fire still takes wind and rain, and the failures that follow are exactly what an inspection catches. Call (877) 798-7859 for a free estimate.
Because a cap can be displaced, undersized, or unsealed and still let rain in. When wind-driven rain crosses a low-slope roof, it finds the gap at the cap or the flashing first. We reset or replace the cap and reseal the flashing so the firebox stays dry.
Cleaning soot is maintenance; masonry repair restores structure. Soot removal clears the flue, but it won’t fix a cracked crown, a failing joint, or spalling brick. Those need repointing, tuckpointing, or crown restoration so water stops getting behind the wall. Call (877) 798-7859 to talk through which one you need.
Often it can be repaired, though badly rusted hardware sometimes needs replacing. Year-round humidity is the usual culprit, not fire. We check the damper during inspection and tell you whether it can be freed or should be swapped for a properly fitted component.
Start with the cap and flashing, since those are what fail first in high wind. A pre-season inspection checks the cap fastening, the crown, and the roof seal around the termination. Call (877) 798-7859 for a free estimate and we’ll flag anything that needs attention before the first storm band arrives.
Call (877) 798-7859 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Nothing gets recommended here without evidence you can see for yourself, and when a repair can safely wait, we’ll tell you. Fast dispatch, 7am-7pm.
Written by the team at Chimney Sweep Davie.